Medium Carbon Steel Bar rod manufacturing company in India
Medium Carbon Steel Bar rod manufacturer Medium Carbon Steel Bar rod suppliers Medium Carbon Steel Bar rod stockists Medium Carbon Steel Bar rod exporter Bhopal, Madhya Pradesh
Medium Carbon Steel Bar UAE | Medium Carbon Steel Bar Indonesia | Medium Carbon Steel Bar Australia | Medium Carbon Steel Bar Malaysia | Medium Carbon Steel Bar Singapore | Medium Carbon Steel Bar Iran | Brazil Medium Carbon Steel Bar
WHY BUY A FULL BAR WHEN YOU JUST NEED A SMALL VOLUME? The Group, through its steel-making plant and rolling mills, focuses on the production of steel product ranging from bars to rods serving mainly the construction and engineering sectors. We produce of stainless steel bar, hot rolled carbon and alloy flats, Round Bar, bright bar, square bar, hex bar, flat bar,Black Bar, Forged Bar, Rod, sharp cornered squares, and special sections. These products are exported to countries such as Singapore, Indonesia, Brunei, Myanmar, Hong Kong, Australia, Fiji, New Zealand, Papua New Guinea, Mauritius, Maldives, Sri Lanka, Pakistan, South Africa, Madagascar, Egypt, UAE, Amman, Kuwait, Bahrain, United Kingdom, Denmark, Switzerland and Germany. We are staffed by a team of well-trained technical personnel, providing technical support and services relating to quality and applications of our products. Our technical team is able to advise on the most appropriate product quality to meet your requirements. Our specialty is to provide wide range of Medium Carbon Steel Bar with no minimum order.
GB/T799,ASTM A29,A108,A321,A575,
BS970,DIN1652, JIS G4051
Section shape
Flat , Square, Round , Rings, Hollows,
Blocks and special Shapes
Length
As your required
Application
Carbon steel rod applies to chemical industry,
shipping industry,manufacturing industry,
construction,decorate Industry,electric power,
pump shafts, sanitary wares,furniture handles,
boiler,high temperature,
resistant,low temperature resistant,
corrosion resistant.
Medium Carbon Steel Billets
Manufacturer | Exporter | Suppliers | Stockist
Our modern steel melting Shop consists of an induction furnace, LRF and a continuous casting machine. The quality is controlled by highly trained personnel by means of continuous testing and process control. This shop produces billets in various special steel grades as per IS, BIS, DIN, SAE Standards.
GB/T799,ASTM A29,A108,A321,A575,
BS970,DIN1652, JIS G4051
Section shape
Flat , Square, Round , Rings, Hollows,
Blocks and special Shapes
Length
As your required
Application
Carbon steel rod applies to chemical industry,
shipping industry,manufacturing industry,
construction,decorate Industry,electric power,
pump shafts, sanitary wares,furniture handles,
boiler,high temperature,
resistant,low temperature resistant,
corrosion resistant.
Medium Carbon Steel Blooms
Manufacturer | Exporter | Suppliers | Stockist
Our modern steel melting Shop consists of an induction furnace, LRF and a continuous casting machine. The quality is controlled by highly trained personnel by means of continuous testing and process control. This shop produces blooms in various special steel grades as per IS, BIS, DIN, SAE Standards.
Stainless steel is often selected for its high corrosion resistance in addition to strength and fatigue endurance. If you want to buy Medium Carbon Steel Bar in India, Saudi Arabia, South Africa, Malaysia, Indonesia, Kuwait, UAE, Korea, Russia or anywhere in the world here are few tips to buy quality products on time:
Always ask for Medium Carbon Steel Bar Mill Certificate
Check after sales service through their existing clientile, you can also buy small quantity first to check the service
Material with ASTM standards
Competitive price
Beware about used / surplus material
Beware about rejected material, you can ask for third party inspection for assured material
Product replacement policy
Good Packing for sea and Air transport
For high quality choose ISO certified company
Purchase directly from manufacturers for Competitive price & accurate materials
Medium Carbon Steel Bar buyers
Medium Carbon Steel Bar can be used for a number of different applications, including:
Screw machine products
Shafts
Valves
Fittings
Gears
Fasteners
Food processing equipment
Instruments
Screws
Bearings
Mining machinery
Aircraft parts, exhaust manifolds
Pumps
Medium Carbon Steel Bar case studies
Its about one of our client in Abu Dhabi city, we have exported 1 Ton Hot rolled bar he wanted to buy the Bar at low price. Thus brought Bar from China, but the bar failed the test Later he brought the Bar from India, but was duped by a dummy company. The customer was under heavy pressure from the end user. He was facing a legal prosecution as had under contract obliged to complete the project within a specific time frame. He went to several big European brands but all of them offered delivery of 12-15 weeks. He again resorted to buying from a few select Indian and Korean Suppliers. We got the mail. We replied within 25 minutes. He asked for a Third Party Inspection and a 3.2 Certification. We accepted the terms. Within a span of 90 minutes we had the sales contract from the client. We supplied the goods and the client was relieved from the heavy pressure he was under. Now the client normally buys from big Manufacturers , but gives us opportunities for urgent needs and maintenance projects.
Medium Carbon Steel Bar ready stock countrywise & Available Quantity Approx.
Medium Carbon Steel Bar in South Africa 500 Ton approxMedium Carbon Steel Bar in United Arab Emirates 500 Ton approxMedium Carbon Steel Bar in Calgary Canada 1200 Ton approxMedium Carbon Steel Bar in Dubai 1200 Ton approxMedium Carbon Steel Bar in United Arab Emirates 1800 TonMedium Carbon Steel Bar in Bhopal, Madhya Pradesh 500 Ton approxMedium Carbon Steel Bar in India 1600 TonMedium Carbon Steel Bar in Oman 1200 Ton approxMedium Carbon Steel Bar in USA 1800 TonMedium Carbon Steel Bar in Seattle 500 Ton approxMedium Carbon Steel Bar in Singapore 1200 Ton approxMedium Carbon Steel Bar in Malaysia 800 TonMedium Carbon Steel Bar in New Zealand Contact for stockMedium Carbon Steel Bar in United States 1200 Ton approxMedium Carbon Steel Bar in Canada 550 TonMedium Carbon Steel Bar in Indonesia 500 Ton approxMedium Carbon Steel Bar in South Korea 800 TonMedium Carbon Steel Bar in Iran 350 TonMedium Carbon Steel Bar in Norway 800 TonMedium Carbon Steel Bar in Chennai 1800 Ton
Medium Carbon Steel Bar in Pune 550 Ton
Medium Carbon Steel Bar in New Delhi 800 Ton
Medium Carbon Steel Bar in Netherlands 1200 Ton approx
Medium Carbon Steel Bar in Denmark 550 Ton
Medium Carbon Steel Bar in Jakarta, Indonesia 1200 Ton approx
Medium Carbon Steel Bar in Houston, TX 650 Ton
Medium Carbon Steel Bar in Philadelphia, PA 700 Ton
Medium Carbon Steel Bar in Durban 550 Ton
Medium Carbon Steel Bar in Johannesburg 1800 Ton
Medium Carbon Steel Bar in Pretoria 650 Ton
Medium Carbon Steel Bar in Soweto 1800 Ton
Medium Carbon Steel Bar in Port Elizabeth 550 Ton
Medium Carbon Steel Bar in Benoni 500 Ton approx
Medium Carbon Steel Bar in Vereeniging 1800 Ton
Medium Carbon Steel Bar in Bloemfontein 800 Ton
Medium Carbon Steel Bar in Newcastle 350 Ton
Medium Carbon Steel Bar in East London 500 Ton approx
Medium Carbon Steel Bar in Welkom 1200 Ton approx
Medium Carbon Steel Bar in King Williams Town 800 TonMedium Carbon Steel Bar in Nigel 1800 TonMedium Carbon Steel Bar in Pietersburg 350 TonMedium Carbon Steel Bar in Abu Dhabi 550 TonMedium Carbon Steel Bar in Nelspruit 800 TonMedium Carbon Steel Bar in Qatar 1800 TonMedium Carbon Steel Bar in Oman 500 Ton approxMedium Carbon Steel Bar in Potchefstroom 650 TonMedium Carbon Steel Bar in Saudi Arabia 350 TonMedium Carbon Steel Bar in Ajman 1800 TonMedium Carbon Steel Bar in Umm al-Quwain 800 TonMedium Carbon Steel Bar in Calcutta 650 TonMedium Carbon Steel Bar in Pakistan 550 TonMedium Carbon Steel Bar in Denmark 1200 Ton approxMedium Carbon Steel Bar in Italy 650 TonMedium Carbon Steel Bar in Australia 500 Ton approxMedium Carbon Steel Bar in Fujairah 800 TonMedium Carbon Steel Bar in Japan 1800 TonMedium Carbon Steel Bar in Brazil 1200 Ton approxMedium Carbon Steel Bar in Peru 350 Ton
Medium Carbon Steel Bar in Canada 500 Ton approx
Medium Carbon Steel Bar in Ras al-Khaimah
Medium Carbon Steel Bar in Sharjah 1200 Ton approx
Medium Carbon Steel Bar in Sydney 800 Ton
Medium Carbon Steel Bar in Melbourne 550 Ton
Medium Carbon Steel Bar in Perth 500 Ton approx
Medium Carbon Steel Bar in Adelaide 650 Ton
Medium Carbon Steel Bar in Hobart 550 Ton
Medium Carbon Steel Bar in Canberra 1800 Ton
Medium Carbon Steel Bar in Brisbane 800 Ton
Medium Carbon Steel Bar in Pietermaritzburg 650 Ton
Medium Carbon Steel Bar in Rustenburg 350 Ton
Medium Carbon Steel Bar in Witbank 500 Ton approx
Medium Carbon Steel Bar in Carltonville 1200 Ton approx
Medium Carbon Steel Bar in Klerksdorp 800 Ton
Medium Carbon Steel Bar in George 500 Ton approx
Medium Carbon Steel Bar in Botshabelo 1800 Ton
Medium Carbon Steel Bar in Kimberley 1200 Ton approx
We have our strong network within India’s all states including Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal to supply Medium Carbon Steel Bar within 4 -12 hrs.
List of Countries where MD Exports LLP supply all size & grade Bright Bars / Rods:
Why Should I Order Medium Carbon Steel Bar From MD Exports LLP?
MD Exports LLP is ISO certified
MD Exports LLP ships directly from the mill to the buyer, eliminating the cost of stocking and providing significant savings to its customers.
MD Exports LLP offers overnight delivery for Medium Carbon Steel Bar
Professional packaging ensures that your product is received in top condition
Our staff has in-depth product knowledge and extensive cross training. They are motivated to give you quick, accurate information-first call, every call!
Medium-carbon steels (1030,1040,1050,1060,1137,1141,1144,1340) can be heat treated to have a good balance of ductility and strength. These steels are typically used in large parts, forgings, and machined components.
Medium-carbon steels are similar to low-carbon steels except that the carbon ranges from 0.30 to 0.60% and the manganese from 0.60 to 1.65%. Increasing the carbon content to approximately 0.5% with an accompanying increase in manganese allows medium carbon steels to be used in the quenched and tempered condition. The uses of medium carbon-manganese steels include shafts, axles, gears, crankshafts, couplings and forgings. Steels in the 0.40 to 0.60% C range are also used for rails, railway wheels and rail axles.
AISI 1030 Carbon Steel (UNS G10300)
The AISI 1030 steel is a high carbon steel, and has moderate strength and hardness in the as-rolled condition. It can be hardened and strengthened by cold work. It also has fair machinability, ductility and good weldability.
Chemical Composition
The chemical composition of AISI 1030 carbon steel is outlined in the following table.
Element
Content (%)
Iron, Fe
98.67-99.13
Manganese, Mn
0.60-0.90
Carbon, C
0.270-0.340
Phosphorous, P
≤ 0.040
Sulfur, S
≤ 0.050
Physical Properties
The physical properties of AISI 1030 carbon steel are tabulated below.
Properties
Metric
Imperial
Density
7.85 g/cc
0.284 lb/in3
Melting point
1510°C
2750°F
Mechanical Properties
The following table shows mechanical properties of the cold drawn AISI 1030 carbon steel.
Properties
Metric
Imperial
Tensile strength, ultimate
525 MPa
76100 psi
Tensile strength, yield
440 MPa
63800 psi
Modulus of elasticity
190-210 GPa
29700-30458 ksi
Bulk modulus (typical for steel)
140 GPa
20300 ksi
Shear modulus (typical for steel)
80 GPa
11600 ksi
Poissons ratio
0.27-0.30
0.27-0.30
Elongation at break (in 50 mm)
12%
12%
Reduction of area
35%
35%
Hardness, Brinell
149
149
Hardness, Knoop (converted from Brinell hardness)
169
169
Hardness, Rockwell B (converted from Brinell hardness)
80
80
Hardness, Vickers (converted from Brinell hardness)
155
155
Machinability (based on AISI 1212 steel. as 100 machinability)
70
70
Thermal Properties
The thermal properties of AISI 1030 carbon steel are given in the following table.
Other designations that are equivalent to AISI 1030 carbon steel include the following:
ASTM A29 (1030)
ASTM A546 (1030)
SAE J403 (1030)
ASTM A510 (1030)
ASTM A576 (1030)
SAE J412 (1030)
ASTM A512 (1030)
ASTM A682 (1030)
DIN 1.1172
ASTM A513 (1030)
ASTM A830
UNI CB 35
ASTM A519 (1030)
MIL S-11310 (CS 1030)
ASTM A108
ASTM A544 (1030)
FED QQ-S-700(C1030)
FED QQ-S-635
ASTM A545 (1030)
SAE J1397 (1030)
AISI 1040 Carbon Steel (UNS G10400)
AISI 1040 carbon steel has high carbon content and can be hardened by heat treatment followed by quenching and tempering to achieve 150 to 250 ksi tensile strength.
Chemical Composition
The following table shows the chemical composition of AISI 1040 carbon steel.
Element
Content (%)
Iron, Fe
98.6-99
Manganese, Mn
0.60-0.90
Carbon, C
0.370-0.440
Sulfur, S
≤ 0.050
Phosphorous, P
≤ 0.040
Physical Properties
The physical properties of AISI 1040 carbon steel are tabulated below.
Properties
Metric
Imperial
Density (chemical composition of 0.435% C, 0.69% Mn, 0.20% Si, annealed at 860°C (1580°F))
7.845 g/cc
0.2834 lb/in³
Melting point
1521°C
2770°C
Mechanical Properties
The mechanical properties of AISI 1040 carbon steel are outlined in the following table.
Properties
Metric
Imperial
Tensile strength
620 MPa
89900 psi
Yield strength
415 MPa
60200 psi
Bulk modulus (typical for steels)
140 GPa
20300 ksi
Shear modulus (typical for steels)
80 GPa
11600 ksi
Elastic modulus
190-210 GPa
27557-30458 ksi
Poisson’s ratio
0.27-0.30
0.27-0.30
Elongation at break (in 50 mm)
25%
25%
Reduction of area
50%
50%
Hardness, Brinell
201
201
Hardness, Knoop (converted from Brinell hardness)
223
223
Hardness, Rockwell B (converted from Brinell hardness)
93
93
Hardness, Rockwell C (converted from Brinell hardness. Value below normal HRC range, for comparison purposes only)
13
13
Hardness, Vickers (converted from Brinell hardness)
211
211
Izod impact (annealed at 790°C (1450°F))
45 J
33.2 ft-lb
Izod impact (as rolled)
49 J
36.1 ft-lb
Izod impact (normalized at 900°C (1650°F)
65 J
47.9 ft-lb
Other designations
Other designations that are equivalent to AISI 1040 carbon steel include:
ASTM A29 (1040)
ASTM A510 (1040)
ASTM A513
ASTM A519 (1040)
ASTM A546 (1040)
ASTM A576 (1040)
ASTM A682 (1040)
ASTM A827
ASTM A830
MIL S-11310 (CS 1040)
MIL S-16788
MIL S-46070
SAE J1397 (1040)
SAE J403 (1040)
SAE J412 (1040)
AISI 1050 Carbon Steel (UNS G10500)
C1050 is a medium carbon, medium tensile steel with good strength, toughness and wear resistance.C1050 is a versatile medium carbon engineering steel that can be through hardened to a little over 2.5” (63mm), as well as being flame or induction hardened to Rc61.
Chemical Composition
The chemical composition of AISI 1050 carbon steel is tabulated below.
Element
Content (%)
Iron, Fe
98.46-98.92
Manganese, Mn
0.60-0.90
Carbon, C
0.470-0.55
Sulfur, S
≤ 0.050
Phosphorous, P
≤ 0.040
Physical Properties
The following table shows the physical properties of AISI 1050 carbon steel.
Properties
Metric
Imperial
Density
7.85 g/cm3
0.284 lb/in³
Mechanical Properties
The mechanical properties of the cold drawn AISI 1050 carbon steel are outlined in the following table.
Properties
Metric
Imperial
Tensile strength
690 MPa
100000 psi
Yield strength
580 MPa
84100 psi
Shear modulus (typical for steel)
80 GPa
11600 ksi
Bulk modulus (typical for steel)
140 GPa
20300 ksi
Elastic modulus
190-210 GPa
27557-30458 ksi
Poisson’s ratio
0.27-0.30
0.27-0.30
Elongation at break (in 50 mm)
10%
10%
Reduction of area
30%
30%
Hardness, Rockwell C (converted from Brinell hardness. Value below normal HRC range, for comparison purposes only)
13
-
Hardness, Brinell
197
197
Hardness, Knoop (converted from Brinell hardness)
219
219
Hardness, Rockwell B (converted from Brinell hardness)
92
92
Hardness, Rockwell C (converted from Brinell hardness. Value below normal HRC range, for comparison purposes only)
13
13
Hardness, Vickers (converted from Brinell hardness)
207
20
Thermal Properties
The thermal properties of AISI 1050 carbon steel are given in the following table.
Properties
Metric
Imperial
Thermal conductivity (typical steel)
49.8 W/mK
346 BTU in/hr.ft².°F
Other Designations
Other designations that are equivalent to AISI 1050 carbon steel include:
AMS 5085
ASTM A29 (1050)
ASTM A510 (1050)
ASTM A513
ASTM A519 (1050)
ASTM A576 (1050)
ASTM A682 (1050)
ASTM A827
ASTM A830
QQ S700 (C1050)
SAE J1397 (1050)
SAE J403 (1050)
SAE J412 (1050)
AISI 1060 Carbon Steel (UNS G10600)
AISI 1060 carbon steel has characteristics similar to that of AISI 1055 carbon steel.The following datasheet will give an overview of AISI 1060 carbon steel.
Chemical Composition
The chemical composition of AISI 1060 carbon steel is outlined in the following table.
Element
Content (%)
Iron, Fe
98.35-98.85
Manganese, Mn
0.60-0.90
Carbon, C
0.55-0.660
Sulfur, S
≤ 0.050
Phosphorous, P
≤ 0.040
Physical Properties
The physical properties of AISI 1060 carbon steel are tabulated below.
Properties
Metric
Imperial
Density
7.85 g/cm3
0.284 lb/in3
Melting point
1510ºC
2750ºF
Mechanical Properties
he following table shows mechanical properties of cold drawn AISI 1060 carbon steel.
Properties
Metric
Imperial
Tensile strength, ultimate
620 MPa
89900 psi
Tensile strength, yield
485 MPa
70300 psi
Modulus of elasticity
190-210 GPa
29700-30458 ksi
Bulk modulus (typical for steel)
140 GPa
20300 ksi
Shear modulus (typical for steel)
80 GPa
11600 ksi
Poissons ratio
0.27-0.30
0.27-0.30
Elongation at break (in 50 mm)
10%
10%
Reduction of area
45%
45%
Hardness, Brinell
183
183
Hardness, Knoop (converted from Brinell hardness)
204
204
Hardness, Rockwell B (converted from Brinell hardness)
89
89
Hardness, Vickers (converted from Brinell hardness)
192
192
Thermal Properties
The thermal properties of AISI 1060 carbon steel are given in the following table.
Properties
Metric
Imperial
Thermal expansion co-efficient
11 µm/m°C
6.11 µin/in°F
Thermal conductivity
49.8 W/mK
346 BTU in/hr.ft2.°F
Other Designations
Other designations that are equivalent to AISI 1060 carbon steel include the following:
AMS 7240
ASTM A29 (1060)
ASTM A510 (1060)
ASTM A513
ASTM A576 (1060)
ASTM A682 (1060)
ASTM A713 (1060)
SAE J1397 (1060)
SAE J403 (1060)
SAE J412 (1060)
AFNOR CC 55
DIN 1.0601
UNI C 60
B.S. 060 A 62
MIL SPEC MIL-S-16974 (Gr. 1060)
AISI 1137 Carbon Steel (UNS G11370)
Chemical Composition
The following table shows the chemical composition of AISI 1137 carbon steel.
Element
Content (%)
Iron, Fe
~98
Manganese, Mn
1.35-1.65
Carbon, C
0.32-0.39
Sulfur, S
0.08-0.13
Phosphorous, P
0.04 (max)
Physical Properties
The physical properties of AISI 1137 carbon steel are tabulated below.
Properties
Metric
Imperial
Density
7.7-8.03 g/cm3
0.278-0.290 lb/in3
Mechanical Properties
The mechanical properties of AISI 1137 carbon steel are outlined in the following table.
Properties
Metric
Imperial
Tensile strength
584 MPa
84702 psi
Yield strength
344 MPa
49893 psi
Elastic modulus
190-210 GPa
27557-30458 ksi
Poisson’s ratio
0.27-0.30
0.27-0.30
Elongation
26.80%
26.80%
Reduction of area
53.90%
53.90%
Hardness
174
174
Other Designations
Other designations that are equivalent to AISI 1137 carbon steel include:
AMS 5024
ASTM A29 (1137)
ASTM A311 (1137)
ASTM A510 (1137)
ASTM A576 (1137)
SAE J1397 (1137)
SAE J403 (1137)
SAE J412 (1137)
AMS 5020
AMS 5024C
AMS 5024D
ASTM A108
FED QQ-S-637 (1137)
SAE J414
AISI 1141 Carbon Steel (UNS G11410)
Chemical Composition
The chemical composition of AISI 1141 carbon steel is tabulated below.
Element
Content (%)
Iron, Fe
97.73 – 98.2
Manganese, Mn
1.35 – 1.65
Carbon, C
0.370 – 0.45
Sulfur, S
0.080 – 0.13
Phosphorous, P
0.040
Physical Properties
The following table shows the physical properties of AISI 1141 carbon steel.
Properties
Metric
Imperial
Density
7.85 g/cm3
0.284 lb/in³
Mechanical Properties
The mechanical properties of cold drawn AISI 1141 carbon steel are outlined in the following table.
Properties
Metric
Imperial
Tensile strength
675 MPa
97900 psi
Yield strength
360 MPa
52200 psi
Izod impact
11 J
8.11 ft-lb
Bulk modulus (typical for steel)
140 GPa
20300 ksi
Shear modulus (typical for steel)
80 GPa
11600 ksi
Elastic modulus
190-210 GPa
27557-30458 ksi
Poisson’s ratio
0.27-0.30
0.27-0.30
Elongation at break (in 50 mm)
22%
22%
Reduction of area
38%
38%
Hardness, Brinell
192
192
Hardness, Knoop (converted from Brinell hardness)
214
214
Hardness, Rockwell B (converted from Brinell hardness)
91
91
Hardness, Rockwell C (converted from Brinell hardness. Value below normal HRC range, for comparison purposes only)
11
11
Hardness, Vickers (converted from Brinell hardness)
201
201
AISI 1144 Carbon Steel (UNS G11440)
Chemical Composition
The following table shows the chemical composition of AISI 1144 carbon steel.
Element
Content (%)
Iron, Fe
97.50 – 98.01
Manganese, Mn
1.35 – 1.65
Sulfur, S
0.240 – 0.330
Carbon, C
0.40 – 0.480
Phosphorous, P
0.040
Physical Properties
The physical properties of AISI 1144 carbon steel are tabulated below.
Properties
Metric
Imperial
Density
7.85 g/cm3
0.284 lb/in³
Mechanical Properties
The mechanical properties of cold drawn AISI 1144 carbon steel are outlined in the following table.
Properties
Metric
Imperial
Tensile strength
745 MPa
108000 psi
Yield strength
620 MPa
89900 psi
Bulk modulus (typical for steel)
140 GPa
20300 ksi
Shear modulus (typical for steel)
80.0 GPa
11600 ksi
Elastic modulus
190-210 GPa
27557-30458 ksi
Poisson’s ratio
0.27-0.30
0.27-0.30
Elongation at break
10%
10%
Reduction of area
30%
30%
Hardness, Brinell
217
217
Hardness, Knoop (converted from Brinell hardness)
240
240
Hardness, Rockwell B (converted from Brinell hardness)
95
95
Hardness, Rockwell C
17
17
Hardness, Vickers (converted from Brinell hardness)
228
228
AISI 1340 Alloy Steel (UNS G13400)
Chemical Composition
The chemical composition of AISI 1340 alloy steel is outlined in the following table.
Element
Content (%)
Iron, Fe
97.25-97.87
Manganese, Mn
1.60-1.90
Carbon, C
0.380-0.430
Silicon, Si
0.15-0.35
Sulfur, S
≤ 0.040
Phosphorous, P
≤ 0.035
Physical Properties
The following table shows the physical properties of AISI 1340 alloy steel.
Properties
Metric
Imperial
Density (typical for steel)
7.87 g/cm3
0.284 lb/in³
Mechanical Properties
The mechanical properties of annealed AISI 1340 alloy steel are displayed in the following table.
Properties
Metric
Imperial
Tensile strength
703 MPa
102000 psi
Yield strength
434 MPa
62900 psi
Bulk modulus (typical for steel)
140 GPa
20300 ksi
Shear modulus (typical for steel)
80.0 GPa
11600 ksi
Elastic modulus
190-210 GPa
27557-30458 ksi
Poisson’s ratio
0.27-0.30
0.27-0.30
Elongation at break (in 50 mm)
25.50%
25.50%
Reduction of area
57.30%
57.30%
Izod Impact
46.0 J
33.9 ft-lb
Hardness, Brinell
207
207
Hardness, Knoop (converted from Brinell hardness)
207
207
Hardness, Rockwell B (converted from Brinell hardness)
93
93
Hardness, Rockwell C (converted from Brinell hardness)
15
15
Hardness, Vickers (converted from Brinell hardness)
217
217
Machinability (based on 100 machinability for AISI 1212 steel)
50
50
Grade Comparison
CES Name
UK
UN
USA
Ger
many
France
Italy
Japan
Russia
Type
ASTM
New
BS
Old BS
ISO
UNS
W.-Nr.
DIN
AF
NOR
UNI
JIS
GOST
High Carbon Steel
1080
060
A78
G10
800
1.1248
Ck75
XC 75
C 75
1050.8
1095
060
A96
G10
950
1.1274
Ck101
XC 100
C 100
Low Carbon Steel
1015
040
A15
G10
150
1.1141
Ck15
XC15
C15
S15C
1020
040
A20
En 3A
C20
G10
200
1.0402
Ck22
C20
C21
S20C
1050.2
1022
120
M19
G10
220
1.1133
20Mn5
20M5
G22Mn3
SMnC420
1117
210M17
En 32M
G11
170
A15G
1118
214M15
En 201
G11
180
Medium Carbon Steel
1030
080
A30
En 5B
C30
G10
300
1.0528
Ck30
XC32
C30
S30C
1050.3
1040
080
A40
En 8C
C40
G10
400
1.1186
Ck40
XC42H1
C40
S40C
1050.4
1050
080
M50
En 43A
C50
G10
500
1.054
Ck50
XC50
C50
S50C
1050.5
1060
080A62
C60
G10
600
1.1221
Ck60
XC60
C60
S58C
1050.6
1137
212M36
En 8M
G11370
35MF6
CF35S
Mn10
SUM41
A35
1141
212A42
En 8DM
G11410
45MF4
1144
G11440
1.0727
45S20
45MF6
CF44
SMn28
SUM43
1340
G13
400
1.5223
42M
nV7
Shapes over 426 lbs. per foot are silicon killed to insure uniform properties
Medium Carbon Steel Bar standard sizes & availability
Sizes
Availability
Medium Carbon Steel Bar
6mm
Medium Carbon Steel Bar
8mm
Medium Carbon Steel Bar
10mm
Medium Carbon Steel Bar
12mm
Medium Carbon Steel Bar
13mm
Medium Carbon Steel Bar
16mm
Medium Carbon Steel Bar
19mm
Medium Carbon Steel Bar
22mm
Medium Carbon Steel Bar
28mm
Medium Carbon Steel Bar
40mm
Medium Carbon Steel Bar
60mm
Medium Carbon Steel Bar
75mm
Medium Carbon Steel Bar
90mm
Medium Carbon Steel Bar
120mm
Medium Carbon Steel Bar | Medium Carbon Steel Bar manufacturer | Medium Carbon Steel Bar supplier | Medium Carbon Steel Bar dealer | Medium Carbon Steel Bar stockist | Medium Carbon Steel Bar suppliers| Medium Carbon Steel Bar Price | Medium Carbon Steel Bar Rate List | Medium Carbon Steel Bar Top Manufacturer | Medium Carbon Steel Bar distributor | Cold finish Medium Carbon Steel Bar | Hot rolled Medium Carbon Steel Bar | Cold drawn Medium Carbon Steel Bar | Medium Carbon Steel Bar trader | Medium Carbon Steel Bar urgent delivery | Medium Carbon Steel Bar stock | Medium Carbon Steel Bar standard sizes | Buy Medium Carbon Steel Bar in USA UK Thailand Russia Qatar China Sweden Poland Philippines Mexico Egypt Nigeria Netherlands Oman Spain Colombia Azerbaijan Turkey Denmark Belgium Germany Iran Kuwait Belgium Taiwan Malaysia Bhopal, Madhya Pradesh India
Manufacturer | Exporter | Suppliers | Stockist
Manufacturer | Exporter | Suppliers | Stockist
Manufacturer | Exporter | Suppliers | Stockist
Manufacturer | Exporter | Suppliers | Stockist Bar, Rings, Hollows, Blocks and special Shapes.
Manufacturer | Exporter | Suppliers | Stockist
Manufacturer | Exporter | Suppliers | Stockist
Manufacturer | Exporter | Suppliers | Stockist
Manufacturer | Exporter | Suppliers | Stockist
Its about one of our client in Abu Dhabi city, we have exported 1 Ton Hot rolled bar he wanted to buy the Bar at low price. Thus brought Bar from China, but the bar failed the test Later he brought the Bar from India, but was duped by a dummy company. The customer was under heavy pressure from the end user. He was facing a legal prosecution as had under contract obliged to complete the project within a specific time frame. He went to several big European brands but all of them offered delivery of 12-15 weeks. He again resorted to buying from a few select Indian and Korean Suppliers. We got the mail. We replied within 25 minutes. He asked for a Third Party Inspection and a 3.2 Certification. We accepted the terms. Within a span of 90 minutes we had the sales contract from the client. We supplied the goods and the client was relieved from the heavy pressure he was under. Now the client normally buys from big Manufacturers , but gives us opportunities for urgent needs and maintenance projects.