DIN 1.2714 / 55NiCrMoV7 Steel Bar manufacturing company in India
DIN 1.2714 / 55NiCrMoV7 Steel Bar manufacturer DIN 1.2714 / 55NiCrMoV7 Steel Bar suppliers DIN 1.2714 / 55NiCrMoV7 Steel Bar stockists DIN 1.2714 / 55NiCrMoV7 Steel Bar exporter Bhopal, Madhya Pradesh
DIN 1.2714 / 55NiCrMoV7 Steel Bar UAE | DIN 1.2714 / 55NiCrMoV7 Steel Bar Indonesia |DIN 1.2714 / 55NiCrMoV7 Steel Bar Australia | DIN 1.2714 / 55NiCrMoV7 Steel Bar Malaysia | DIN 1.2714 / 55NiCrMoV7 Steel Bar Singapore | DIN 1.2714 / 55NiCrMoV7 Steel Bar Iran | Brazil DIN 1.2714 / 55NiCrMoV7 Steel BarContents
- What is DIN 1.2714 / 55NiCrMoV7 Steel Bar ?
- DIN 1.2714 / 55NiCrMoV7 Steel Bar Specification
- DIN 1.2714 / 55NiCrMoV7 Steel Bar Application
- DIN 1.2714 / 55NiCrMoV7 Steel Bar Composition
- Authorised Dealer Of DIN 1.2714 / 55NiCrMoV7 Steel Bar?
- Why Us?
Established in 2006, MD Exports LLP is a pioneer of the nation’s steel industry and a leading manufacturer of DIN 1.2714 / 55NiCrMoV7 Steel Bar . As a result of our international network, we are helping our steel bar & rods customers to export their products such as Stainless Steel, Carbon Steel, Alloy Steel, Duplex Stainless Steel, Super Duplex, Copper Nickel, Hastelloy, Inconel, Monel, Titanium, 253MA, 254SMO, AL6XN, Custom 450, Jethete M152, Beryllium Copper Bar Rod etc. These products are exported to countries such as Singapore, Indonesia, Brunei, Myanmar, Hong Kong, Australia, Fiji, New Zealand, Papua New Guinea, Mauritius, Maldives, Sri Lanka, Pakistan, South Africa, Madagascar, Egypt, UAE, Amman, Kuwait, Bahrain, United Kingdom, Denmark, Switzerland and Germany. We are staffed by a team of well-trained technical personnel, providing technical support and services relating to quality and applications of our products. Our technical team is able to advise on the most appropriate product quality to meet your requirements.
DIN 1.2714 / 55NiCrMoV7 Steel Bar
|
DIN 1.2714 / 55NiCrMoV7 Steel is a low-alloy hot work tool steel. It has good toughness,strength and wear resistance. Due to the molybdenum in the 1.2714 steel, it is not sensitive to temper brittleness. 55NiCrMoV7 has good hardenability and the hardness of the parts is almost the same MD Exports LLP is suppliers of this grade in diameters. As a nickel chromium tool and die steel it has good hardening properties and combines very good high temperature toughness with shock and fatigue strength characteristics.
DIN 1.2714 / 55NiCrMoV7 Steel Bar Specification
|
MD Exports LLP offers following processing for DIN 1.2714 / 55NiCrMoV7 Steel Bar
DIN 1.2714 / 55NiCrMoV7 Steel Bar Application
- spindles,
- forming rolls,
- punches,
- blanking and forming dies,
- trimmer dies,
- clutch parts,
- pawls,
- bearings,
- chucks parts,
- rollers,
- knuckle pins,
- clutch pins,
- shear blades
DIN 1.2714 / 55NiCrMoV7 Steel Bar Composition
Chemical Composition
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) | V(%) |
| 0.50-0.60 | 0.10-0.40 | 0.65-0.95 | 0.030 | 0.020 | 0.95-1.25 | 1.50-2.00 | 0.30-0.50 | 0.05-0.25 |
Mechanical Properties
| Annealing hardnessHBS | Cold pull hardnessHBS | Preheating temperature℃ | Quenching temperature℃ | Holding timemin | Hardening medium | Temper temperature℃ | After tempering hardness≥HRC | |
| salt-bath furnace | controlled atmosphere furnace | |||||||
| 235 | 262 | 788 | 1191 | 1204 | 5～15 | air cooling | 522 | 60 |
Other Designations
| USA- | GermanyDIN,WNr | JapanJIS | FranceAFNOR | EnglandBS | ItalyUNI | ChinaGB | PolandPN | CzechiaCSN | AustriaONORM | RussiaGOST | InterISO | ||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
Fabrication and Heat Treatment
Tempering:
Heat uniformly to the required temperature allowing a soaking time of about two hours per 25mm of ruling section. Withdraw the steel from the furnace and allow to cool in air. Double tempering is highly recommended, the tool being allowed to cool to room temperature between each temper.
Heat treatment:
Heat treatment temperatures, such as the rate of heating, cooling and soaking times will vary due to factors such as the shape and size of each component. Considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult your heattreatment provider for full guidance on heat treatment 55NiCrMoV7.
Annealing:
Soak the 55NiCrMoV7 thoroughly at 740-760°C before furnace cooling at a maximum rate of 10°C per hour down to 600°C followed by air cooling.
Authorised Dealer Of DIN 1.2714 / 55NiCrMoV7 Steel Bar
 |
 |
 |
|
Goradia Special Steels Ltd |
Jai Laxmi Casting & Alloys Private Limited |
R.L.Steels & Energy Ltd.(20mm-160mm) |
To Manufacturing DIN 1.2714 / 55NiCrMoV7 Steel Bar & Round Bar We Procure High Quality Raw Material & Scrap From Bohler, Uddeholm, ASSAB
 |
 |
 |
|
Bohler |
Uddeholm |
ASSAB |
Why Should I Order DIN 1.2714 / 55NiCrMoV7 Steel Bar From MD Exports LLP?
- MD Exports LLP is ISO certified
- MD Exports LLP offers overnight delivery
- Professional packaging ensures that your product is received in top condition
- Our staff has in-depth product knowledge and extensive cross training. They are motivated to give you quick, accurate information-first call, every call!
- Contact us and get the right answers right away!