L6 Tool Steel Bar manufacturing company in India
L6 Tool Steel Bar manufacturer L6 Tool Steel Bar suppliers L6 Tool Steel Bar stockists L6 Tool Steel Bar exporter Bhopal, Madhya Pradesh
L6 Tool Steel Bar UAE | L6 Tool Steel Bar Indonesia |L6 Tool Steel Bar Australia | L6 Tool Steel Bar Malaysia | L6 Tool Steel Bar Singapore | L6 Tool Steel Bar Iran | Brazil L6 Tool Steel BarContents
- What is L6 Tool Steel Bar ?
- L6 Tool Steel Bar Specification
- L6 Tool Steel Bar Application
- L6 Tool Steel Bar Composition
- Authorised Dealer Of L6 Tool Steel Bar?
- Why Us?
Established in 2006, MD Exports LLP is a pioneer of the nation’s steel industry and a leading manufacturer of L6 Tool Steel Bar . As a result of our international network, we are helping our steel bar & rods customers to export their products such as Stainless Steel, Carbon Steel, Alloy Steel, Duplex Stainless Steel, Super Duplex, Copper Nickel, Hastelloy, Inconel, Monel, Titanium, 253MA, 254SMO, AL6XN, Custom 450, Jethete M152, Beryllium Copper Bar Rod etc. These products are exported to countries such as Singapore, Indonesia, Brunei, Myanmar, Hong Kong, Australia, Fiji, New Zealand, Papua New Guinea, Mauritius, Maldives, Sri Lanka, Pakistan, South Africa, Madagascar, Egypt, UAE, Amman, Kuwait, Bahrain, United Kingdom, Denmark, Switzerland and Germany. We are staffed by a team of well-trained technical personnel, providing technical support and services relating to quality and applications of our products. Our technical team is able to advise on the most appropriate product quality to meet your requirements.
L6 Tool Steel Bar
|
L6 Tool Steel is a versatile, oil-hardening tool steel that is characterized by very good toughness. L6 tool steel is suitable for use as tools, dies, and machine parts, which require a good combination of hardness and toughness. The relatively high nickel content results in an alloy with greater impact toughness compared to the other common oil-hardening grades. Due to its lower carbon content and relatively high nickel content, L6 tool steel has slightly better shock-resistance than more highly alloyed types and should be used where some wear-resistance can be sacrificed for increased toughness.MD Exports LLP is able to supply AISI L6 tool steels materials with different shape and size range, according to different requirements.
L6 Tool Steel Bar Specification
|
MD Exports LLP offers following processing for L6 Tool Steel Bar
L6 Tool Steel Bar Application
- spindles,
- forming rolls,
- punches,
- blanking and forming dies,
- trimmer dies,
- clutch parts,
- pawls,
- bearings,
- chucks parts,
- rollers,
- knuckle pins,
- clutch pins,
- shear blades
L6 Tool Steel Bar Composition
Chemical Composition
|
Element
|
Content (%)
|
|---|---|
|
Nickel, Ni
|
1.25-2.00
|
|
Chromium, Cr
|
0.60-1.20
|
|
Carbon, C
|
0.65-0.75
|
|
Silicon, Si
|
0.5
|
|
Molybdenum, Mo
|
0.5
|
|
Manganese, Mn
|
0.25-0.80
|
|
Vanadium, V
|
0.20-0.30 (a)
|
|
Copper, Cu
|
0.25
|
|
Phosphorus, P
|
0.03
|
|
Sulfur, S |
0.03
|
|
Iron, Fe
|
Balance
|
Physical Properties:
|
Properties
|
Metric
|
Imperial
|
|---|---|---|
|
Density
|
7.86 g/cm³
|
0.284 lb/in³
|
|
Melting point
|
2590°F
|
1421°C
|
Mechanical Properties
The mechanical properties of L6 tool steels are tabulated below.
|
Properties
|
Metric
|
Imperial
|
|---|---|---|
|
Poisson’s ratio
|
0.27- 0.30
|
0.27- 0.30
|
|
Elastic modulus
|
190-210 GPa
|
27557-30457 ksi
|
Other Designations Other designations that are equivalent to L6 tool steels include:
- UNS T61206
- ASTM A681
- DIN 1.2713
- SAE J437
- SAE J438
Fabrication and Heat Treatment
Tempering
L6 tool steels are tempered between 177 to 538°C (350 to 1000°F) for Rockwell C 62 to 45 range.
Annealing
L6 tool steels are annealed at 788°C (1450°F) and cooled slowly at a maximum of 4°C (40°F) per hour.
Cold Working
Conventional methods are used for cold working of L6 tool steels.
Welding
L6 tool steels are generally weldable in nature.
Forging
L6 tool steels are forged at 1079°C (1975°F) down to 871°C (1600°F). These steels should not be forged below 843°C (1550°F).
Forming
Conventional methods are used for forming of L6 tool steels.
Machinability
L6 tool steels have extremely good machinability that is rated at 90% in comparison with the machinability of W group water hardening low alloy steels that are rated 100% as a baseline.
Heat Treatment
L6 tool steels are heated slowly to 816°C (1500°F) and then held for 10 to 30 min. This is followed by water or oil quenching.
Authorised Dealer Of L6 Tool Steel Bar
 |
 |
 |
|
Goradia Special Steels Ltd |
Jai Laxmi Casting & Alloys Private Limited |
R.L.Steels & Energy Ltd.(20mm-160mm) |
To Manufacturing L6 Tool Steel Bar We Procure High Quality Raw Material & Scrap From Bohler, Uddeholm, ASSAB
 |
 |
 |
|
Bohler |
Uddeholm |
ASSAB |
Why Should I Order L6 Tool Steel Bar From MD Exports LLP?
- MD Exports LLP is ISO certified
- MD Exports LLP offers overnight delivery
- Professional packaging ensures that your product is received in top condition
- Our staff has in-depth product knowledge and extensive cross training. They are motivated to give you quick, accurate information-first call, every call!
- Contact us and get the right answers right away!